Steps to Enable and Configure Non-Linear Rates

✨ Use Case

You want to apply adult-wise pricing on OTA channels (like Booking.com, Agoda), where room rates vary based on the number of adults. For example:

• ₹3000 for 1 adult

• ₹4500 for 2 adults

• ₹6000 for 3 adults

To enable this setup, you need to activate Non-Linear Rate Mode from the backend (SNS panel) and then update the adult-wise rates in the eZee Centrix Channel Manager.

✅ Step 1: Apply Temporary Stop Sell on Rate Plans

To prevent OTA sync issues while updating rates:

1. Login to eZee Centrix Channel Manager

2. Navigate to: Rates & Inventory > Rate Plan

3. Apply Stop Sell on the rate plans you’re updating

     Click here for the Stop Sell guide

✅ Step 2: Enable Non-Linear Mode from SNS Panel

1. Login to: https://sns.ezeetechnosys.com

2. Go to: On Boarding Panel >> Common Task >> 13. Enable Non-Linear Rates

3. Enter your Hotel Code and click Check Setting

4. Select Yes under “Current Non-Linear Setting”

5. Click Update

Screenshot Reference:

✅ Step 3: Set Channel Rate Mode to Non-Linear

1. InSNS panel, go to: On Boarding Panel >> Common Task >> 09. Rates/Inventory

2. Enter your Hotel Code and click Check Setting

3. For each OTA channel (e.g., Booking.com, Expedia):

   • Set Rate Mode to Nonlinear

4. Click Update

Screenshot Reference:

✅ Step 4: Update Adult-wise Rates in Channel Manager

1. Login to eZee Centrix

2. Go to: Rates & Inventory > Update Rates

3. You will now see fields for:

   • Adult1 Rate

   • Adult2 Rate

   • Adult3 Rate

4. Enter your desired rates (e.g., ₹3000, ₹4500, ₹6000)

5. Click Save

6. Remove the Stop Sell to go live
   
   

 Important Tips

• ✔️ Ensure your connected OTAs support non-linear/adult-wise pricing

• ✔️ Confirm all rate plan mappings are correct before updating

• ⚠️ Only remove Stop Sell once everything is configured and synced properly